Tag: ROI

Creat Region of Interest mask in IMAQ image

I have been working on using a USB webcam as a research tool to observe the heart beat of a Daphina (water flea) these days. Since LabVIEW 2009 IMAQdx is available for 3rd party USB cameras, no extra USB driver is required. So I used the old but classic webcam Philips SPC 900NC to build a Daphnia observation system. I may talk more about this later.

To cut a long story short, I tried to process only the Region of Interest (ROI) of the grabbed image rather than the whole one. This can make the analysis easier. Since this USB webcam does not support ROI imaging, we cannot set XY pixels on it.   I tried to google the solution and found creating a mask or, a pseudo ROI, can block the unwanted image. I programmed an example for blocking the unwanted image by selecting ROI on the image:

For some unknown reason I cannot create snippet from this VI, so I save the screenshot instead.
In this example three memories were created to store the original image, the mask and the modified image. If an ROI is selected (FALSE case), firstly convert the ROI info to a mask, and then mask the source image with the mask image. If no ROI is selected (TRUE case), the destination image is linked to the source image.

Note that:1. The property node “ROI” is created by right clicking the “image” indicator in the block diagram and selecting “Create>Property Node>ROI”.
2. The image type of the “Mask” must be Grayscale U8. The original and the changed images can be any image type.
3. It is masking the image rather than ROI imaging. So it will NOT increase the frame rate nor decrease the image size. All black regions are filled with 255 by default.

Hope this example can be helpful. Let me know if you have any problem or are interested in controlling conventional USB webcams with LabVIEW IMAQdx.

Tags : , , , , , ,